TOPT-T / D-Serie Reinstwasserreiniger / Wasserreiniger Maschine Kosten / Preis

Type

Basic Application Type Ultra pure Water Purifier

TOPT-10/20/30/40TJ

TOPT-10/20/30/60DJ

Scope of application

Atomic absorption spectrometer (AAS), microorganism analysis, general chemistry, inductively coupled plasma atomic emission spectrometry (ICP-AES), etc

Quality of water obtained

Quality of pure water:ordinary pure water obtained meets standard for Grade III water as specified in Water for Analytical Laboratory Use: Specification and Test Methods (GB6682-2008).

Water quality meets the requirements of Water for Analytical Laboratory Use: Specification and Test Methods, ASTM,NCCLS and CAP; Resistivity (conductivity):18.25MΩ.cm (0.054uS/cm);

Soluble silicon SiO₂) is less than 0.1PPb,absorbance (254nm,1cm) is equal to or less than 0.001;ion concentration unit: PPb

Technical indicators

TOC(ppb)

<10ppb

Microorganism

<1cfu/ml

Pyrogen (EU/ml)

Pore size of dead-end filter

adaptable to your need (0.01um, 0.05um, 0.1um, 0.2um)

Performance features

Microcomputer-controlled and touch-key operation, automatic preparation of pure water, Regulation of water flow

Adopts high precision water quality online monitoring system and Real-time online monitoring of quality of water obtained

, to ensure the reliability of water quality, ensure the quality of the experiment.

One machine to produce two kinds of water, pure water, ultrapure water, Pure water, ultrapure water outlet are equipped with dust cover

Fully enclosed bacteriostasis design

Automatic/manual cleaning and maintenance of pretreatment and reverse osmosis system

Control circuit adopts safe voltage, electrical and water thoroughly separation, avoid circuit aging damage caused by moisture inside, leaks.

Additional functions: Foot-operated switch; movable arm to get water; infrared remote control .

Working condition

TOPT-T Ultra pure Water Purifier:

Raw water: tap water (TDS is more than or equal to 300; equipped with intensified pretreatment unit);

water intake pressure: 1.0 to 5.0 kg/cm²;

Temperature: 5 to 40°C ;

Power supply: 220V±10V/ 50Hz (power: 30 to 80W)

TOPT-D Ultra pure Water Purifier:

Raw water: Deionized water, distilled water or reverse-osmosized water;

water intake pressure: 1.0 to 3.0 kg/cm²;

Temperature: 5 to 40°C

Power supply: 220V±10V/ 50Hz (power: 30 to 80W)

Water Yield

TOPT-T: Water Yield:10/20/30/40L/H

Water flow rate: 1.5-2.0L/min(controlled)

TOPT-D:Water Yield:10/20/30/60L/H

Water flow rate: 1.5-2.5L/min (controlled)

Dimension

TOPT-T; Dimension: 465x475x500mm  

TOPT-D: Dimension: 380x475x490mm